SPEED BUMPS / HUMPS / CAR STOPS

SPEED BUMP

 

  • recycled rubber
    • resistant to weather, oil, salt, moisture, UV light, and temperature
    • will not warp, chip, or crack
    • flexible, conforms to surface contours
  • molded-in stripes of yellow road marking tape
  • designed for up to 10 mph
  • conforms to surface contour
  • dual bottom channels for drainage
    • protects wire, hose, or pipe to 3/4" dia.
  • asphalt or concrete installation
  • cut with a utility knife if necessary

Sold in 6 foot lengths with three yellow stripes

72"W x 12"D x 2.6"H, 52 lbs.


End caps are sold sparately

12"W x 12"D x 2.6"H, 3.25 lbs.

SPEED HUMP

 

  • made of recycled rubber
    • resistant to weather, oil, salt, moisture, UV light, and temperature
    • will not warp, chip, or crack
    • flexible, conforms to surface contours
  • install on asphalt or concrete (hardware sold separately)
  • available in 2 ft. sections
    • male and female end caps
  • for traffic speeds 10 mph or less
  • gentler than speed pumps
    • good for heavy traffic areas
  • reflective stripes in yellow
    • molded in marking tape
  • dual bottom channels for drainage
    • protects wire, hose, or pipe to 3/4" diameter

Center sections are 24"W x 36"L x 2.4"H, 6 installation holes, 52 lbs.


End Caps are 17.5"W x 36"L x 2.4"H, 5 installation holes, 23 lbs.

CAR STOP

 

  • recycled rubber
  • bonded relective stripes in yellow
  • will not crack, chip, or warp
  • asphalt or concrete installation
  • 72"L x 6"W x 4.5"H, Weight 40 lbs.

6 foot wide with four yellow stripes on each side, 40 lbs.